Fiberglass single axial fabricSpecifications
1.High Tensile Strength and Quick Wet out
2.Perfect designable character
3.Stability
4.Stiffnes
Fiberglass single axial fabric is made of fiberglass direct roving parallel aligned in 90°directions, then stitched by polyester yarn. Also can select to add c
Technical Specification:
Code |
Weight (g/m2) | 90° Weft (g/m2) |
Chop strands (g/m2) |
Polyester tissue (g/m2) | Layer |
ET200 | 200 | 200 | - | - | 1 |
ETM450 | 450 | 250 | 200 | 2 | |
ETM450/N45 | 495 | 250 | 200 | 45 | 3 |
ET400 | 400 | 400 | - | - | 1 |
ETM650 | 650 | 400 | 250 | - | 2 |
ETM650/N45 | 695 | 400 | 250 | 45 | 3 |
ET600 | 600 | 600 | - | - | 1 |
ETM900 | 900 | 600 | 300 | - | 2 |
ETM900/N45 | 945 | 600 | 300 | 45 |
|
Package & Storage:
The fabrics should be stored away from heat and moisture, and in their original packaging. The best conditions are : temperatures between 15 and 35 , humidity between 35 and 65%. If the product is not stored under these specifications , it is advisable to condition it in the workshop for at least 24 hours before use, to prevent condensation. The pallets can be stored in 2 levels(1/1).Tianma recommends that the material be used according to FIFO(first in, first our)method. It is recommended the use of a spacer plae(10mm) between the pallets
