Tissue Face Mats Fiberglass Mats Face Towels Roof Tissue Fiberglass Veils

Fiberglass Continuous Filament Mat EMS335 of Nanjing Tianming:Basic Parameters: Model No.: EMS335Weight:1.1oz. per sq/ft or 335grams per sq/m ±8%Width:up to 102.36" or up to 2600mmNet Weight per roll:66lbs±1.1lbs or 30kg±0.5kgSize of the Inner Carton Tube:Length 51" * Diameter 3"

Featured Products

Fiberglass Continuous Filament Mat EMS335 of Nanjing Tianming:

Basic Parameters: 
Model No.: EMS335
Weight:1.1oz. per sq/ft or 335grams per sq/m ±8%
Width:up to 102.36" or up to 2600mm
Net Weight per roll:66lbs±1.1lbs or 30kg±0.5kg
Size of the Inner Carton Tube:Length 51" * Diameter 3" * Thickness 0.2"
or Length 1300mm * Diameter 76mm * Thickness 5mm

Technical Date: 
Loss on Ignition: 5%±1%
Moistrure: ≤0.2%
tension strength: Intensity in Horizontal ≥ 120N
Intensity in Vertical ≥ 120N

Qualified by the Third-part Test:
• The odour characteristics - RA
• VOC - SGS
• Asbestos-free - SGS
• RoHs - SGS
• SOC - Shimadzu
etc.

Uses: 
• Automotive parts
• Boats/yachts
• Building components
• Chemical corrosion resistant pipes
• Cooling towers
• Tanks
etc.
Or please tell me the application of your fiberglass chopped strand mat. Then  the one most suitable for you will be recommended.

Packaging:
Tissue Surface Mat Fiberglass Mat Surface Mat Roofing Tissue Fiberglass Veil

Loading Quantity:
One plastic bag and carton for a roll with N.W.30kg. 12 or 16 rolls on a pallet. 20 pallets (10 pallets with 12 rolls, 10 pallets with 16 rolls) in one 20' container, that is N.W. 8.4t in one 20' container.

Storage:
Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C - 35°C, 35% - 65% respectively. Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.

Fiberglass Continuous Filament Mat Series:
Model No.WeightWidthLoss on Ignition MoistrureNet Weight per RollUse And Craftwork
(oz. per sq/ft)(grams per sq/m)(inch)(mm)(%)(%)(lb)(kg)
EMS-P0.98/1.25/1.47300/380/45041-1021040-26002-8≤0.26630Pultrusion / Winding
EMS-R0.74/0.98/1.47/2225/300/450/60041-1021040-26002-5≤0.26630RTM / Automotive Parts
EMS-E0.98/1.47/2300/450/60041-1021040-26002-5≤0.26630Insulatin Material / Automotive Parts
EMS-M0.98/1.25/1.47300/380/45041-1021040-26002-6≤0.26630Compression Molding
EMS-O0.98/1.25/1.47300/380/45041-1021040-26002-5≤0.26630Common Type for RTM
Compress Molding And Automotive Parts

 

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours