Fiberglass Continuous Filament Mat EMS200 of Nanjing Tianming:
Basic Parameters:
Technical Date:
Qualified by the Third-part Test:
• The odour characteristics - RA
• VOC - SGS
• Asbestos-free - SGS
• RoHs - SGS
• SOC - Shimadzu
etc.
Uses:
• Automotive parts
• Boats/yachts
• Building components
• Chemical corrosion resistant pipes
• Cooling towers
• Tanks
etc.
Or please tell me the application of your fiberglass chopped strand mat. Then the one most suitable for you will be recommended.
Packaging:
Loading Quantity:
One plastic bag and carton for a roll with N.W.30kg. 12 or 16 rolls on a pallet. 20 pallets (10 pallets with 12 rolls, 10 pallets with 16 rolls) in one 20' container, that is N.W. 8.4t in one 20' container.
Storage:
Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C - 35°C, 35% - 65% respectively. Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.
Fiberglass Continuous Filament Mat Series:
Any question, please contact me:
Soft and Thin Continuous Strand Veil Surfacing Mat
Soft and Thin Continuous Strand Veil Surfacing Mat
Soft and Thin Continuous Strand Veil Surfacing Mat
Basic Parameters:
| Model No.: | EMS200 |
| Weight: | 0.66oz. per sq/ft or 335grams per sq/m ±8% |
| Width: | up to 102.36" or up to 2600mm |
| Net Weight per roll: | 66lbs±1.1lbs or 30kg±0.5kg |
| Size of the Inner Carton Tube: | Length 51" * Diameter 3" * Thickness 0.2" or Length 1300mm * Diameter 76mm * Thickness 5mm |
Technical Date:
| Loss on Ignition: | 5%±1% |
| Moistrure: | ≤0.2% |
| tension strength: | Intensity in Horizontal ≥ 120N Intensity in Vertical ≥ 120N |
Qualified by the Third-part Test:
• The odour characteristics - RA
• VOC - SGS
• Asbestos-free - SGS
• RoHs - SGS
• SOC - Shimadzu
etc.
Uses:
• Automotive parts
• Boats/yachts
• Building components
• Chemical corrosion resistant pipes
• Cooling towers
• Tanks
etc.
Or please tell me the application of your fiberglass chopped strand mat. Then the one most suitable for you will be recommended.
Packaging:
Loading Quantity:
One plastic bag and carton for a roll with N.W.30kg. 12 or 16 rolls on a pallet. 20 pallets (10 pallets with 12 rolls, 10 pallets with 16 rolls) in one 20' container, that is N.W. 8.4t in one 20' container.
Storage:
Unless otherwise specified, fiberglass products should be stored in a dry, cool and moistureproof area. Room temperature and humidity should always be maintained at 15°C - 35°C, 35% - 65% respectively. Best used within 12 months after production date. Fiberglass products should remain in their original packaging until just prior to use.
Fiberglass Continuous Filament Mat Series:
| Model No. | Weight | Width | Loss on Ignition | Moistrure | Net Weight per Roll | Use And Craftwork | |||
| (oz. per sq/ft) | (grams per sq/m) | (inch) | (mm) | (%) | (%) | (lb) | (kg) | ||
| EMS-P | 0.98/1.25/1.47 | 300/380/450 | 41-102 | 1040-2600 | 2-8 | ≤0.2 | 66 | 30 | Pultrusion / Winding |
| EMS-R | 0.74/0.98/1.47/2 | 225/300/450/600 | 41-102 | 1040-2600 | 2-5 | ≤0.2 | 66 | 30 | RTM / Automotive Parts |
| EMS-E | 0.98/1.47/2 | 300/450/600 | 41-102 | 1040-2600 | 2-5 | ≤0.2 | 66 | 30 | Insulatin Material / Automotive Parts |
| EMS-M | 0.98/1.25/1.47 | 300/380/450 | 41-102 | 1040-2600 | 2-6 | ≤0.2 | 66 | 30 | Compression Molding |
| EMS-O | 0.98/1.25/1.47 | 300/380/450 | 41-102 | 1040-2600 | 2-5 | ≤0.2 | 66 | 30 | Common Type for RTM Compress Molding And Automotive Parts |
Any question, please contact me:
Soft and Thin Continuous Strand Veil Surfacing Mat
Soft and Thin Continuous Strand Veil Surfacing Mat
Soft and Thin Continuous Strand Veil Surfacing Mat