Fiberglass Woven Roving Combimat, Combination Mat

Product DescriptionE-Glass Woven Roving Combo Mat is a complex mat made by stitching together woven roving and a layer of distributed chopped strands.Its main specification is woven roving (300g/m²~900g/m²) with chopped strands (50g/ m²~500g/m²).It widely produces FRP products like wind energy,boat,and a

Featured Products

Fiberglass Woven Roving Combimat, Combo Mat
Product Description
E-Glass Woven Roving Combo Mat is a complex mat made by stitching together woven roving and a layer of distributed chopped strands.
Its main specification is woven roving (300g/m²~900g/m²) with chopped strands (50g/ m²~500g/m²).
It widely produces FRP products like wind energy,boat,and automobile.
The end products inclue: dorm,boat hull ,auto shell,cooling vehicles,door and profile,etc .

Product features :

No binder,good compatible with Multi resin.
Simplify the molding process
Improve the production efficiency and reduce cost.
 
Packing &Storage:


Each roll covering by polyethylene plastic bag,then placed into carton,and set on pallet.
Each pallet stack 9 or 16 cartons.The pallet shall no be higher than 2 layers.
 
Product shall be placed under dryness condition and shall no be open the covering membrane until applying.

 
Technical Data:
 
TypeWoven Roving/Chopped Strand(g/m2)Water Content(%)Wet Speed(<=S)Width(mm)
EMK600/225600/225<=0.260200-2600
EMK600/300600/300<=0.260200-2600
EMK600/450600/450<=0.260200-2600
EMK800/225800/225<=0.260200-2600
EMK800/300800/300<=0.260200-2600
EMK800/450800/450<=0.260200-2600
Fiberglass Woven Roving Combimat, Combo MatFiberglass Woven Roving Combimat, Combo Mat
Fiberglass Woven Roving Combimat, Combo Mat

Contact us

Please feel free to give your inquiry in the form below We will reply you in 24 hours